Rock-Tred Polymer Coating Solutions Defining Excellence Since 1939

CRACK-N-PATCH is a concrete repair kit designed to repair and patch concrete substrates.  CRACK-N-PATCH kits contain 100% solids epoxy and pre-weighed aggregate. COOLER formula is designed to cure at substrate temperatures down to 40 F. In a warm environment, this formulation provides a FAST cure.

CRACK-N-PATCH is a concrete repair kit designed to repair and patch concrete substrates.  CRACK-N-PATCH kits contain 100% solids epoxy and pre-weighed aggregate. FREEZER formula is designed to cure at substrate temperatures down to 0 F. In a warm environment, this formulation provides a SUPER-FAST cure.

CRACK-N-PATCH is a concrete repair kit designed to repair and patch concrete substrates.  CRACK-N-PATCH kits contain 100% solids epoxy and pre-weighed aggregate. STANDARD formula is designed for normal installation temperatures from 55 F to 90 F.

ELASTI-FILL P is a fast cure, 100% solids, 2-componet, self-leveling joint sealant. ELASTI-FILL P is a modified polyurea that can be applied at temperatures ranging from 45º F to 150º F.

ELASTI-POXI JOINT FILL is a 2-component, 100% solids, 100% reactive epoxy that has been formulated to fill joints or saw cuts and remain flexible even after cure. ELASTI-POXI JOINT FILL meets ASTM specification C920, Type M, Grade P that has approximately 85% elongation and meets all USDA guidelines for use in federally inspected facilities.

Woven fiberglass mesh for stabilizing and reinforcing vertical and horizontal substrates

Fiberglass tape for stabalizing cracks or slab joints

RQP is a gray color, multi-purpose, 100% solids epoxy repair paste with excellent workability and open time, but has a 30 minute dry time for fast-track repairs.  RQP can be used for last minute touch ups between coats of 100% solids epoxy and also to repair chips, defects, small voids or “honeycombing” in horizontal, vertical and overhead concrete substrates.  It is also an excellent adhesive for flooring accessory installations. RQP is a two component thixotropic compound that is easily applied with a putty knife, trowel or plastic applicator.

ROCK-PATCH is an ultra-fast cure 100% solids / 100% solvent-free and '0' VOC , 2-component high-strength polyurea patching material. ROCK-PATCH is formulated to allow for heavy vehicle traffic within minutes after the placement of the material. ROCK-PATCH is an extremely low viscosity product that allows for deep penetration into the concrete substrate for superior adhesion. ROCK-PATCH has good resistance to most common chemicals, is VOC compliant, and meets all USDA guidelines for use in federally inspected facilities.